PDA

View Full Version : Parts Repository ONLY


willsonman
12-15-2009, 12:58 AM
There is to be NO discussion just simply a post of parts for others to use. Engines, pilots, busts, etc.

INCLUDE PART NAMES in your post as this will facilitate accurate searches.

This is not a how-to thread. There are some great parts out there floating around a consolidated thread with them will be very helpful for everyone.

herc40
12-15-2009, 09:41 PM
I have the engines I used on the Avro Anson MK1, the files has 2 engines that are called L&R PP, If you only need one just delete the other. It is 2, Seven piston rotory engine, with a combined total of 704 Face in Wings 3D.

Wingman57
12-15-2009, 09:45 PM
My spinning radial with 1400 polys.

willsonman
12-17-2009, 08:00 PM
Arrestor Hook
OS FR5 300 Radial Engine

willsonman
12-17-2009, 08:02 PM
Weston Magnum R Motor
Robart R780 Radial Motor

willsonman
12-17-2009, 08:03 PM
Turbine
2-stroke Pusher with servo and fuel tank

willsonman
12-17-2009, 08:05 PM
The classic 9-cylinder Radial motor. 9-cylinder is the lower-poly version by Keylitho.

dhk79
12-17-2009, 08:43 PM
5740 polys for a showcase engine.

herc40
12-18-2009, 11:26 AM
Here is a general spinner, and the torus I use for setting the prop placement. Next is the Lite wheel Swirl, and an Old Time Pilot figure bust.


These or Wings 3D files, and you MUST rename them back to ( . Wings )

herc40
12-18-2009, 12:21 PM
These are some Cub Wheels I made. It has a hubcap on one side, and a flat face on the other, only the tire rubber has a materials.

This wheel features deep grove tire tread, and a stylish hubcap.

if you would like non-spinning hubcaps, I believe, you can leave it as a solid object , name it CAPS with NO ~CS_ in front. and do not add a pivot to it.

This file is a Wings 3D format, and must be renamed .wings

herc40
12-18-2009, 12:44 PM
This is the Jessica Rabbit bust. Enjoy
The file is bigger than I can zip. This is a Wings 3D file, and you MUST CHANGE the name of the file back to Jessica Rabbit Bust.wings in order to use it in Wings 3D.

herc40
12-18-2009, 01:03 PM
more odds and ends. I have included a Linkage off the Aerobat 40, a Mini Servo for foamies, and my Sargent Danger pilot figure that I used on the Shearwater Hydroski. I also included the Headset from my Wilga pilot.

My Wings 3D, Sargent Danger Pilot file is to big to ZIP, you must change the directory to (.wings) before you can use this pilot figure in Wings 3D. The rest are ZIPPED files, and must be UNZIPPED. Enjoy

herc40
12-18-2009, 01:33 PM
This is a static prop I created for Junkboy999, to test how the TMNT engine was going to look. It can be used to have something to look at, for linning up, and sizing your TORUS. Size the prop to what you think it should look like, and run your torus around it. I think its cooL.

I have also added a water rudder setup that I created for the Aerobat 40 w/floats, it has the servo horn allready in place.

Also the Aluminum Landing Gear from my first plane, the Aerobat 40


These files are zipped up, you will have to unzip them.

willsonman
12-18-2009, 05:40 PM
By permission: BrentG's MPI or Dubro Wheels

pplace
12-19-2009, 12:52 PM
Prop hub used on the Top Flite Elder

willsonman
12-21-2009, 11:43 PM
Forgot I had this. A fairly detailed bomb with pylon and collision mesh.

Junkboy999
01-01-2010, 04:16 AM
Here is a collection of wheel I have use on my Models.

Tail Wheel. This is the tail wheel assembly that is for the Citabria, Champ, and Super Decathlon Models. It is well suited for tail draggers. See the Classic Citabria for how it is set up

Light Wheel Is for the hearer EEP foam planes.

Nose wheel is for 15 - 120 tricycle planes.

Spoke wheels are High detail and use for vintage style RC models.

These FILE are ZIPPED and Contain Both a Wings3D file and a 3DS file
versions

My files are placed here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

Junkboy999
01-01-2010, 04:21 AM
Spoke wheels are High detail and use for vintage style RC models. Pictured above

These FILE are ZIPPED and are in 3DS Format and Wings3d format

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

Junkboy999
01-01-2010, 09:15 AM
A simple engine mount and spinner.

2 Mufflers for the Magnum R motor.zip Engine that RcFubar modeled ( it is posted in post # 5 above )


These FILE are zipped up and contain both a WINGS3d file and a 3DS file.


My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

Junkboy999
01-01-2010, 09:49 AM
This is the OS-LA-25 RC engine I put some time into this engine. The spinner is the nut and rod up front. The inside barrel of the Carb is attached to the throttle arm. You can animate this for RF use. Please use this engine for any model you like that needs a 15 - 25 or scale it up ( the head ) for a 40 size. Just remember to give the modeler his Props when posting your model file to the upload page, and in the description information area inside the model editor it's self.


This FILE is in WINGS3D format and is renamed to G3X so you'll have to rename it to wings before use . THe Zip file was to big to upload.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

Junkboy999
01-01-2010, 10:22 AM
This is the Magnum XL 70 I used on my Blue Max. To save poly's I UV mapped the cylinder head and did not make cooling fins. The engine cylinder head has been mapped, and a small tga file Is places here.

This FILE is zipped up and is in 3ds and Wings 3d format, The Texture is a TGA file.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

Junkboy999
01-01-2010, 10:33 AM
When I started to model some one gave me a sample plane. I'm the type that I likes to see and play with something first to see how it was made. Here is a simple tail dragger 3d Model to play with. If you get if flying in RF ( it still need work ) please do not up load it, Unless you changed it so much I can't tell. :) I'd hate to see 16 people learning how to model import 16 versions of the same model to the swap page

PLANE1 is a zipped up WINGS3D format 3d Model
PLANE2 is a zipped up .3DS file format
You'll have unzip them before use.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.

pplace
01-02-2010, 02:07 PM
Here is the HP VT-.21 Engine I modeled for the Top Flite Elder.

The only item I removed in the actual G4.5 file is the "knurl" on the high end needle adjustment.

brentg
01-13-2010, 07:36 AM
Aim9-h missile....3ds..file is mapped with included tga, plus there is a side view background with all Aim9 models.

dhk79
02-19-2010, 12:21 AM
I posted this on another thread (specifically for a user) and felt it only right that I add it here for everyone to find.

A basic set of floats that I originally used on the Super Decathlon.

Doug

flexible
03-22-2010, 12:25 PM
This is the big bird servo and linkage I made for the ROOKIE

flexible
05-16-2010, 05:09 PM
This is the wheel I made for JAYJAY

DirtyHarry3033
06-15-2010, 07:17 PM
As requested by willsonman, here is the landing gear from my Do-335 in .3ds format.

DH

flexible
06-16-2010, 09:36 PM
JOJOs heat!

willsonman
07-03-2010, 02:13 PM
Robart Robostruts. Two different types. Used with few polygons. Both are included in 3ds format in archive.

inky00
07-20-2010, 01:39 PM
For anyone that wants an engine for there model,here is my MVVS 58 Prosport model.It stands at 8168 Tri's.It is available in 3ds and max format,which are both in the Zip file.

fender1
07-20-2010, 09:11 PM
Rubber band to hold the planes wings to the fuselage. .3ds file

dhk79
07-31-2010, 02:47 PM
Adhering to my own self-imposed principle of borrow a part, leave a part; here's a scale mechanical retract I just designed in payment for an engine I just used.

mwilson914
08-02-2010, 11:55 AM
Since I think control sticks are no fun to model I decided to upload the one I created for the SAAB Gripen. I tried to make it as accurate as possible and it can be even more detailed with good UV mapping and even extra modeling for those into that sort of thing. :)

Just remove the .zip extension and it's ready to import as a .3ds.

mwilson914
08-02-2010, 12:40 PM
Here is a basic AR6400 BRICK which I made for the Ultra Micro 4-Site.

remove the .rfx from the file name to import the .3ds

mrfourtyseven
08-27-2010, 04:51 PM
hitec servo

spot242
08-29-2010, 05:23 PM
hello all

Ive made this model and don't know what to do next so if someone would like to take over and complete it it would be awesome. All Ive done is basically made the 3D model (I used wings 3D.)
Hope someone takes this up as its a great model to fly in real life.

To open this just remove the .rfx and the end of the name.

flexible
08-30-2010, 07:11 PM
Took off the excess hardware and polies

fender1
09-11-2010, 06:11 PM
6CH receiver with flat area for logos 1 one is .3ds file type secound one is .wings file type

fender1
09-12-2010, 08:37 PM
Futaba servo and linkage .3ds file type second one is .wings file type

Cowpig
09-19-2010, 02:10 AM
Partial repost of Futaba servo, originally posted by fender1. This version with mount. Wings file.

flexible
09-20-2010, 10:43 AM
This is the inrunner I made to use on my foamies. It is a Wings file. The prop saver is sized to a 8/9 in. prop. This is the Dualsky, with buitin ESC.

spot242
09-21-2010, 02:35 PM
I was reading through some threads and came across someone wanting a boat so Ive made one hope someone will finish it. The 3D model is complete all that need done is the cs i think.

Thanks to anyone who will take this on :)


To open the file just remove the .zip

doramide7
09-21-2010, 06:43 PM
Turbine
2-stroke Pusher with servo and fuel tank
The classic 9-cylinder Radial motor. 9-cylinder is the lower-poly version by Keylitho.

Cowpig
09-21-2010, 08:14 PM
Another version of Futaba servo (by fender1). Rod is going other way, is longer, and at the end, the 'hook' is horizontal; suited for elevators. Only one servo arm. Mount has 'screws' to mount to other parts. Sorry, no pics-can't upload them.

Cowpig
09-25-2010, 02:28 AM
From my first EA, a simple tail gear. It must be renamed back to .wings.

fender1
10-10-2010, 10:46 AM
An added servo rod holder mounted on the servo arm. first file is .wings. secound is .3ds. Thank Birdman from the google sketchup warehouse for makeing it.

flexible
10-21-2010, 11:48 AM
This is a Wings 3D file. It has ~CS_COLL_ so it will break off.

inky00
10-22-2010, 02:13 PM
Here is a DA-200 engine i made awhile back.It stands at 8068 triangles with exhausts.I have attached it in 3ds and max format.I had to add the .rfx suffix to enable me to upload them,simply remove the .rfx from the filenames and they will be good to use.

flexible
11-08-2010, 08:40 AM
This is a Wings file. Give credit, where credit is due.

fender1
11-15-2010, 07:38 PM
Torpedo .wings and .3ds

jeffpn
11-25-2010, 10:20 AM
Helmet
Head

Wings file

flexible
11-25-2010, 07:46 PM
This is the Camara and platform in 3Ds format

Cowpig
11-25-2010, 08:11 PM
Outrunner Motor and wires. Sides of motor and spinner ready for mapping. Complete with COLL mesh.

Rename to .wings.

Junkboy999
12-11-2010, 07:42 PM
Simple Booster 90 Turbine. Three Different polys count included in both Wings 3D and 3DS formats included in this ZIP ( RAR ) FILE

DEMON(SPb)
12-20-2010, 03:52 PM
I decided to try my hand in creating engine.
I wanted to make OS 91 with pump but I made 91 F3C


There are both .wings file and .3ds without mapping.

jeffpn
12-20-2010, 10:50 PM
Tire
wheel

Wings file in a zipped folder.

792 triangles, baked-in color.

Boof69
12-30-2010, 09:19 PM
These are the floats off my Lockheed Sirius 3,830 polys. With the Coll mesh it's 4,583

flexible
12-31-2010, 03:13 PM
This is a 3Ds file of the Brison 6.4 I made for the ROOKIE

Bjornke
01-02-2011, 01:03 PM
Here is a set of 3 Wheels I made a year or so ago. They are a little high in Poly Count, and may need to be re-sized since they were made in Blender.

Inside the Archive is a Blender, and a Wavefront Object file of each wheel.

Boof69
01-04-2011, 06:04 PM
Thought I'd make this low poly pilot bust for anyone building pre WWII aircraft. 1829 Polys, as low as I could get it

AlternativeRC
01-13-2011, 01:11 AM
This is textured to be the Electrifly SS-35 BL ESC, but by simply modifying the texture, it can be almost any ESC you want, it is .3ds format, zipped up with the texture targa, as well as the .psd, and a max file thrown in.

dhk79
01-16-2011, 09:42 AM
Glider air-brake assembly, suitable for servo animation.

flexible
01-26-2011, 12:06 PM
After locating the CLAM_HOOK under the lifting vehicle, you can locate the tops of all the cables, just under the top of the blade hub, on center.
Be sure to add fuse components for the CLAWS, with strength at max.
Allso set the weight on all pods to .04, and other values to 0 or 1

jeffpn
02-15-2011, 09:46 PM
Spoked Tire

Be careful where you use this. It's a whopping 2,660 triangles.

jeffpn
02-16-2011, 09:49 PM
spoked tire
1,456 triangles

flexible
02-23-2011, 07:17 PM
This is the motor I made for the MCFOAMIES build.

Boof69
03-03-2011, 08:42 PM
Just a quick tail gear model.

Boof69
03-04-2011, 01:39 PM
A pilots seat with harness.

jeffpn
03-15-2011, 08:32 PM
Electric ducted fan. 1,290 triangles. Wings 3D format.

inky00
03-22-2011, 01:42 PM
Mejzlik Carbon Fibre Propeller,1316 tris.For use with Static planes.
The Zip file contains the max file,3ds file and the TGA texture file.
.RFX added to filename to enable uploading,simply remove .RFX from filename and then unzip as normal.

inky00
03-22-2011, 01:50 PM
E-Flite Prop,532 Tris.For use with Static planes.
The Zip file contains the max file and the 3ds file.

inky00
03-22-2011, 02:07 PM
E-Flite Park 250 motor,5618 Tris.
Completely setup and ready to use,all pivots and naming Done.
Zip file contains the max file,3ds file and the TGA texture file.

fender1
04-28-2011, 08:57 PM
RC Marine engine from my boat - Still work in progress- Wings 3D file

jeffpn
05-27-2011, 10:02 PM
Tweety Bird.

Wings 3D and .3ds format.

flexible
05-30-2011, 10:25 PM
EFLIGHT 400
This is a wings file
400 lable

flexible
05-30-2011, 10:29 PM
This is a debro 1 1/2 " five spoke wheel. Wings file.

jeffpn
07-02-2011, 08:58 PM
Tire
Wheel
1,280 triangles

Wings format
Remove .rfx extension to open.

flexible
07-02-2011, 10:28 PM
I lost the first Materials for wings I did, so I made another one. I have included three of Dougs colors. I have included lables so you know what is what. I have included screen schots of how to see the properties of any color. Delet the .g3x to be able to unzip.

flexible
07-05-2011, 12:00 AM
New MOTOR

jeffpn
07-09-2011, 06:06 PM
Electric motor
Wings 3D format
1,607 triangles

flexible
08-10-2011, 09:18 PM
For painting EPP foamies

Boof69
08-17-2011, 02:51 PM
This is off of my Kaos model.
The file is big because of the supplied tga for the wheel.
Replace the rfx file extension with zip

jeffpn
09-25-2011, 09:12 PM
Engine. Colored, motor mount, and working throttle, if desired. 3,690 polies. Wings 3D format.

eric soderlind
10-01-2011, 01:03 PM
Turbine
2-stroke Pusher with servo and fuel tank
what program r u using to do these great builds because i really want to know so i can download it and use it

Maj. Numbskully
10-01-2011, 05:32 PM
This is a temporary post to remind folks what was stated in the O.P................There is to be NO discussion just simply a post of parts for others to use. Engines, pilots, busts, etc.
This is not a how-to thread. .

violators will be prostituted :p

abaser
12-18-2011, 11:10 PM
Here's a low poly servo, pushrod, and control horn setup. This is a .wings file, remove the .rfx to open. Total polys for all 432.

Brian8474
01-21-2012, 11:22 PM
This is the Jessica Rabbit bust. Enjoy
The file is bigger than I can zip. This is a Wings 3D file, and you MUST CHANGE the name of the file back to Jessica Rabbit Bust.wings in order to use it in Wings 3D.


:D :D

flexible
02-14-2012, 11:52 PM
This is a Wings 3D file. It can be used without Mapping if you choose.

jeffpn
03-15-2012, 09:56 PM
Wire bit for flexible.

flexible
03-15-2012, 10:03 PM
Between this and JB999, my prayers are answered. Happy days are here again!

Madratter
03-17-2012, 09:37 PM
Here is an ESC I worked up.

Note: For some reason, the transparency doesn't want to save correctly on the shrink wrap object. So you will need to do that by hand.

Boof69
04-02-2012, 01:51 PM
This is a full figure pilot fully mapped and textured. Polys are relatively low at 3662.
Included in the zip is the max file as well as an obj,3ds, and fbx compatible with max 2009 and up. The psd is also included for easy changes. Enjoy.

Madratter
07-01-2012, 10:42 PM
This is a somewhat modified version of Boof's Pilot, intended to be more World War I like. Included in the zip are the max file (highly recommended), obj, 3ds, and fbx files. If you cannot use the max file, use the fbx file if possible. The 3ds file is mapped, but you will need to rename PilotFigure.tga to PILOTFIG.TGA and then point to it. The .obj version of the file has a slight flaw where the leg goes through the bottom of the coat. You might need to fix that depending on the angle you are using. (Probably not).

The triangles come in at a modest 3056.

Enjoy!

Boof69
09-09-2012, 08:40 PM
This is a Low poly .303 vickers aircraft mounted vickers machine gun .max file.
Poly count is 433. Main and normal maps included.

oneder
10-25-2012, 03:46 PM
I used Jeff's EDF model so I will try and improve my karma a little by sharing this O.S. 120 engine model I made. Its 8,000 polygons but could be optimized to reduce polys if needed. Please give credit if you decide to use it -thanks!

edit* the carb is able to be animated so that it works in the sim

jeffpn
11-04-2012, 05:02 PM
Site Tube. This file is in .wings format

AlternativeRC
12-10-2012, 01:27 AM
Here is a Seamless EPP texture with matching normal map for use in EPP foamies.

It is scaled to correct size for 30 to 36 inch foamies.

4096x4096 texture size, 300 ppi

abaser
12-11-2012, 08:32 AM
Wheel and axle in 3ds and obj.

Poly count at 1238

oneeyejack
02-17-2013, 09:19 AM
Included max, 3ds, fbx and obj...

oneeyejack
02-17-2013, 01:23 PM
Scorpion HKIII 4035-500kV

oneeyejack
02-17-2013, 01:26 PM
Outrage TORQ Servos

oneeyejack
02-17-2013, 03:21 PM
ALIGN Engine Nitro 91HP

abaser
12-08-2013, 12:01 AM
Here's a little tail gear I whipped up. No pivots have been set, nor has linking or naming been done. She's VERY poly heavy at just over 7000. Enjoy.

Remove the .rfx when saving.

legoman
09-08-2016, 12:20 PM
One of the two nukes off my tu-95 with collision mesh

Tri = 966
color baked in

unzip the zip file .wings and .3ds files included