PDA

View Full Version : EXTRA 300 32e From eflite.


Patrick-amidair
12-03-2011, 02:02 PM
haaaaaah i would like to have the skill to do this model, since i have it in real life. i found someone that did the .cs file on swap page, but still no .ea yet....

If someone can help me with that :-) i would participate to create it ...

flexible
12-03-2011, 02:09 PM
There can be no CS, without first haveing an EA.

abaser
12-03-2011, 02:13 PM
This is the base EA

http://www.knifeedge.com/forums/downloads.php?do=file&id=13955

Patrick-amidair
12-03-2011, 02:13 PM
There can be no CS, without first haveing an EA.

Yep My mistake, The .cs is base on the Extra 300 From the original Realflight. But We know that the extra 300 32e is a pretty different model. Is so a nice Patern / 3d machine.

Patrick-amidair
12-03-2011, 02:14 PM
This is the base EA

http://www.knifeedge.com/forums/downloads.php?do=file&id=13955

Exact your right ...

Patrick-amidair
12-05-2011, 06:31 PM
What can i do to help you create this model, Spec are on horizon hobby website, and cs is already done ?

Patrick-amidair
12-27-2011, 04:04 PM
Here the Spec.
Specs
Approx. Flying Duration: 10 minutes
CG (center of gravity): 3.5 - 3.875 in (90 - 98mm) back from LE closest to the fuse
Experience Level: Advanced
Experience Level: Intermediate
Flying Weight: 4.404.60 lb (1.902.10 kg)
Fuel Type: Electric
Hardware Included: Yes
Motor Size: Power 32
Overall Length: 49.0 in (1245mm)
Plane Type: Aerobatic & 3D
Plane Type: Scale Civilian
Power Plant Size: 25-46 Electric
Radio: 4+ channels
Recommended Battery: 3300 4S 14.4V Li-Po
Recommended Environment: Outdoor
Servos: (4) Mini
Speed Control: 60-Amp
Spinner Size: 2.25 in
Trim Scheme Colors: Ultracote White (U870) Flame Red (U883) Silver (U881) Midnight Blue (U885)
Wing Area: 542 sq in (34.9 sq dm)
Wingspan: 52.5 in (1335mm)

Can i just use the same .CS that is already done and just reseize and change in the editor flight carateristic ? i think ill need some help on this one ..

Maj. Numbskully
12-27-2011, 04:40 PM
Edit the Ea that you made the CS for to match the specs ...don't forget to Save As in the editor with a new name before you do anything

Patrick-amidair
12-28-2011, 04:25 PM
Great, Im gonna do my best to make it exacly the same

Maj. Numbskully
12-28-2011, 05:02 PM
Make sure you have the editors Display Properties set to Advanced to see everything that can be edited ;)