PDA

View Full Version : Request for Parkzone Radian Pro


theluthier
05-05-2014, 08:33 AM
There's a Radian Pro AV of the Radian EA on the swaps and it works fine, but of course you can't see the control surfaces and the shape (visual) is not quite right for the Pro.

Anyone care to make an EA of the Pro? 3 view attached and here's a link for the specs:

http://www.parkzone.com/Products/Default.aspx?ProdID=PKZ5480

abaser
05-05-2014, 01:29 PM
I put about 10 minutes into it, but before I go any further, let me say this. If I continue, Im going on the expectation that you will define flight physics. Ill do the model, and get it into RF, maybe the CS. The rest will be up to you or whoever wants to do it. Agreed?

Maj. Numbskully
05-05-2014, 02:35 PM
I'll do the CS if you choose not to

I will double check but I think jeff and I modeled one or two that are similar
If so
maybe you can use its physics as a starting point

Boof69
05-05-2014, 09:40 PM
You should be able to use the physics from the av the op mentioned. Just size it in max to the measurment stated in the RF editor.

theluthier
05-06-2014, 04:46 AM
I do have the plane so I'll do physics (with Doug's help)!

doug schluter
05-06-2014, 11:06 AM
I do have the plane so I'll do physics (with Doug's help)!

hahaha okay Michael huck me under the bus 8) i can help with the physics , Andy i thought you have a lot of models on the go , one more to the list , that's good though , the more the better

abaser
05-06-2014, 12:03 PM
I do have a lot, but this one is pretty straight forward and shouldn't take that long.

mcphatty
05-09-2014, 06:59 AM
Finally!
I'm glad to see someone making the pro. I can help out with the CS if needed.

doug schluter
05-09-2014, 10:54 AM
I do have a lot, but this one is pretty straight forward and shouldn't take that long.

good deal , theluthier has been making me slope soar lately on MP haha

mcphatty
09-25-2014, 09:00 AM
Did this project die?

theluthier
09-25-2014, 02:43 PM
Did this project die?

Hope not!

abaser
09-25-2014, 04:10 PM
Did this project die?

I was actually looking at it a week or so ago. No, its not dead. Things will be slowing down for me before long, and I should be getting back to it. I've got one more in the works that is near completion, so I'll finish it up first.