View Full Version : Flight Design CTLS Freewing Model request.

05-01-2015, 04:05 PM
Hello all,

I originally posted this request on the RF6 design forum since that's what I'm currently running, but someone suggested I might have better luck requesting the model here since it's the most recent version.

I'm fairly new to RC, and a rank n00b on Real Flight, but I'm picking things up pretty quick I think. Specs for the actual plane and the Freewing model are listed below. Please let me know if there's anything I've missed. I know there's a CTSW on the pages, but I've always loved the swept line look of the CTLS so hopefully a designer will have the same sentiment.

Thanks for taking the time and happy flying! :D

Airplane Specs-

Wing Span: 28 Feet, 2 Inches
Length: 21 Feet, 8 Inches
Height: 7 Feet, 8 Inches
Cabin Width: 49
Aspect Ratio: 7.29:1
Empty Weight: 790/ 810Pounds
Gross Weight: 1,320 Pounds
Fuel Capacity: 34/35 Gallons
Fuel Economy: 5.5/4.3 Gallons/Hour
Powerplant: Rotax 912S or 912iS (100HP) 2000 TBO
Speed: 120 KTS
Economy Range: @4300RPM 830 NM /1055 NM

A 3 View of the plane:

Freewing Model Specs -

Wingspan: 1200mm/47.25in
Length: 900mm/35.4in
Flying Weight: 1100g
Power System: Brushless 3510-1000Kv
Speed Control: 30A, Internal BEC, T connector
Propeller / EDF: 9x8 3 blade prop
Servos: 9g5
Landing Gear: Fixed
Required Battery: 11.1V 1800mAh 25C 3 cell LiPo
Required Radio: 4 Channel
Rudder: Yes
Flaps: Optional -molded servo area and flap cut outs
Ailerons: Yes
Lights: No
Hinge Type: Nylon hinges on all control surfaces
Material: EPO Foam

Unfortunately I couldn't find any "3 view" images of the model, but here are some photos I've found:

Multirotor Go
09-22-2016, 02:04 AM
I would love to be able to fly this one on Realflight too

Awesome sport aircraft