Parts Repository ONLY

[flexible]

Between this and JB999, my prayers are answered. Happy days are here again!

[Madratter]

Here is an ESC I worked up.

Note: For some reason, the transparency doesn't want to save correctly on the shrink wrap object. So you will need to do that by hand.

[Boof69]

This is a full figure pilot fully mapped and textured. Polys are relatively low at 3662.
Included in the zip is the max file as well as an obj,3ds, and fbx compatible with max 2009 and up. The psd is also included for easy changes. Enjoy.

[Madratter]

This is a somewhat modified version of Boof's Pilot, intended to be more World War I like. Included in the zip are the max file (highly recommended), obj, 3ds, and fbx files. If you cannot use the max file, use the fbx file if possible. The 3ds file is mapped, but you will need to rename PilotFigure.tga to PILOTFIG.TGA and then point to it. The .obj version of the file has a slight flaw where the leg goes through the bottom of the coat. You might need to fix that depending on the angle you are using. (Probably not).

The triangles come in at a modest 3056.

Enjoy!

[Boof69]

This is a Low poly .303 vickers aircraft mounted vickers machine gun .max file.
Poly count is 433. Main and normal maps included.

[oneder]

I used Jeff's EDF model so I will try and improve my karma a little by sharing this O.S. 120 engine model I made. Its 8,000 polygons but could be optimized to reduce polys if needed. Please give credit if you decide to use it -thanks!

edit* the carb is able to be animated so that it works in the sim

[jeffpn]

Site Tube. This file is in .wings format

[AlternativeRC]

Here is a Seamless EPP texture with matching normal map for use in EPP foamies.

It is scaled to correct size for 30 to 36 inch foamies.

4096x4096 texture size, 300 ppi

[abaser]

Wheel and axle in 3ds and obj.

Poly count at 1238

[oneeyejack]

Included max, 3ds, fbx and obj...

[oneeyejack]

Scorpion HKIII 4035-500kV

[oneeyejack]

Outrage TORQ Servos

[oneeyejack]

ALIGN Engine Nitro 91HP