Go Back   Knife Edge > RealFlight - Designer's Corner > RealFlight 7 - Designer's Corner
Use of this site is subject to our Terms of Use. | Technical Support is available from Great Planes Software Support.

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 07-31-2017, 02:53 PM
GregLloyd GregLloyd is offline
Registered User
 
Join Date: Jul 2017
Location: Pittsburg, CA
Posts: 1
1100mm Electric P-51 Mustang

I purchased the Eleven Hobby P-51 Mustang:
https://www.banggood.com/Eleven-Hobb...p-1055824.html

I also purchased RealFlight 7.5 so I could learn to fly it and not crash this beautiful plane.

I am having difficulty finding a plane that will be the same size and fly similar enough for me to have very few, if no surprises in the air. I am in a windy spot, and 12-18 mph winds are normal.

Has anyone created a model that is similar in RealFlight 7.5? If so, I would like a link, if not, is there documentation to learn how to take the existing P-51 Paintball in RF 7.5 and make it the same power, size and weight?

Here are the specifications:

Description:
Brand Name: Eleven Hobby
Item Name: 'Old Crow' P-51D Mustang
Wingspan: 1100mm / 43in
Length: 961mm / 37.8in
Flying Weight: 1195g/40oz
Wing Load: 55.9 g/dmē (0.13oz/inē)
Wing Area:21.34 dmē (330.7 sq.in)
Power System: 3536-KV850 Brushless Motor
Speed Control: 40A ESC
Propeller / EDF: 10x7.5 Four Blade Propeller
Servos: 6x 9g servos
Landing Gear: Electronic Retracts
CG: 89-94mm(from Leading Edge)
Required Battery: 11.1V 2200mAh 25C 3 cell LiPo EC3 Plug(not included)
Required Radio: 6 Channel
Rudder: Yes
Flaps: Yes
Ailerons: Yes
Elevatir: Yes
Retracts: Yes
Material: EPO Foam
Approx. Flying Duration: 6 minutes

Thank you for your help!
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:43 AM.