Go Back   Knife Edge > RealFlight - Discontinued Products > RealFlight G3
Use of this site is subject to our Terms of Use. | Looking for technical support? Read this!

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
  #1  
Old 02-02-2008, 08:12 PM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
Replacement Interlink controller?

My friend somehow did something to my Interlink controller and the channel used for pitch isn't working (It won't spring back to resting position) , is there a replacement Interlink controller?
Reply With Quote
  #2  
Old 02-02-2008, 09:02 PM
phrank's Avatar
phrank phrank is offline
Registered User
 
Join Date: Jul 2006
Location: Milpitas, CA
Posts: 4,682
Quote:
Originally Posted by mobius1
My friend somehow did something to my Interlink controller and the channel used for pitch isn't working (It won't spring back to resting position) , is there a replacement Interlink controller?
Call support and explain the problem,
they should be able to fix or replace the damaged controller.

Good Luck,
Frank...
Reply With Quote
  #3  
Old 02-03-2008, 01:03 AM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
I've made the hole deeper.

It does need to be "UPS" now.
Reply With Quote
  #4  
Old 02-04-2008, 12:34 PM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
Where should I ship it to?
Reply With Quote
  #5  
Old 02-04-2008, 12:47 PM
opjose's Avatar
opjose opjose is offline
Registered User
 
Join Date: Nov 2005
Location: Third rocky planet.
Posts: 13,220
Contact Tech Support first.
__________________
Quote:
Newbies please click here for important instructions about forum posts: CLICK ME!
Reply With Quote
  #6  
Old 02-04-2008, 01:01 PM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
Thanks.
Reply With Quote
  #7  
Old 02-04-2008, 07:57 PM
Jimmy Newton's Avatar
Jimmy Newton Jimmy Newton is offline
Registered User
 
Join Date: Apr 2007
Posts: 384
What problem...?

Quote:
Originally Posted by mobius1
My friend somehow did something to my Interlink controller and the channel used for pitch isn't working (It won't spring back to resting position) , is there a replacement Interlink controller?

You state that the pitch control won't spring back to resting position. That is the left stick on mode 2 interlinks and isn't supposed to "spring back". If I'm interpreting your post correctly, there is nothing wrong with your interlink...
__________________
Jim
Reply With Quote
  #8  
Old 02-04-2008, 09:21 PM
steverino steverino is offline
Registered User
 
Join Date: Nov 2007
Posts: 12
I have the same problem which I was told by tech support is covered under warranty
the problem is probably the same I have.
Upon looking inside the controller, there's a plastic arm with a pin and a spring that pivots on a pin that's integral to that arm.it's molded as one piece and unfortunately the pin part is only about 1/32" diameter so it breaks off real easy.
Your friend probably didn't do anything to cause it other than use it.
mine just went like that while I was flying .
Felt it just give way and heard a "SPROING" and that's all she wrote.
I opened it up and took out the spring just to make sure it doesn't short anythingout internally and plugged a transmitter in for now 'till spring.

Can't go a week or two and not be able to fly!!

I bet if you shake the controller and listen you'll hear it rattling around in there.
Reply With Quote
  #9  
Old 02-08-2008, 05:32 PM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
Question

Oops, did I mention that the throtle is on the left side. I didn't know the difference between mode 1 and mode 2.
Reply With Quote
  #10  
Old 02-08-2008, 05:36 PM
mobius1 mobius1 is offline
Registered User
 
Join Date: Jan 2008
Posts: 18
the interlink was from ebay. That pin was already broken(and glued) by the time I ordered it.
Reply With Quote
  #11  
Old 02-09-2008, 01:07 AM
rcguy111 rcguy111 is offline
Registered User
 
Join Date: Feb 2008
Posts: 4
Even though I've already started a thread I thought I would chime in. Last week I was just flying around when the throttle stick started to catch and then got stuck to where it would only move from half throttle to full. Then the next day before I called them I was flying and the right stick {aileron} made a sproing noise and now there is no tension on the right stick and no center place. I called them and they said to just send it in under warranty, and that was about it. How long does the warranty last?
Then a couple of days ago the left stick popped back to where now it is working, yet the right stick is still screwed up. I can even hear something banging around in there when I shake it! Should I take it apart and try to fix it, or would that void the warranty?
Reply With Quote
  #12  
Old 01-23-2017, 11:14 PM
cynical209 cynical209 is offline
Registered User
 
Join Date: Sep 2010
Location: Stockton, CA.
Posts: 1
interlink number rubbed out

i cannot read the serial number on my interlink controller is there any way to get a replacement
Reply With Quote
  #13  
Old 01-23-2017, 11:24 PM
adrenoline 60 adrenoline 60 is offline
Registered User
 
Join Date: Jan 2014
Location: Wisconsin
Posts: 577
Your Best course of action would be to contact, Great Planes Software Support.
Check the Gray Bar at the top of the Forum.
Contact Via Telephone, if possible, is always the best/fastest way, to get your problem resolved. (during their work hours)
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:04 AM.