Has anyone else expierenced this....

[Jimmy Newton]

Select the Aero Canard, taxi close to you for a good look at the front gear,
(Three position switch in the middle position) then open the cockpit ( three
position switch fully up ) the cockpit opens and the aircraft "kneals". Now for
the problem; return the three position switch to the middle positon, and the
front landing gear extends into the ground. The same thing happens when
you retract the gear, (three position switch in the down postion) then extend
the gear. If you look close the landing gear extend into the ground. Have tried
this at several fields and airports, all do the same thing.

Just wondering.

Jim

[Blade Scraper]

This happens to all planes with retracts, i dont like that and after you can steer it with the wheels under the ground.

[opjose]

Yes this is "normal" in G3 because of the collision mesh.

[Blade Scraper]

They should fix this. hey opjose remember the older version of G3 were if your gear went down you could raise it back up.

[opjose]

Yes if the gear have a collision mesh.

3.5 does the same thing.