Parts Repository ONLY

[willsonman]

There is to be NO discussion just simply a post of parts for others to use. Engines, pilots, busts, etc.

INCLUDE PART NAMES in your post as this will facilitate accurate searches.

This is not a how-to thread. There are some great parts out there floating around a consolidated thread with them will be very helpful for everyone.

[herc40]

I have the engines I used on the Avro Anson MK1, the files has 2 engines that are called L&R PP, If you only need one just delete the other. It is 2, Seven piston rotory engine, with a combined total of 704 Face in Wings 3D.

[Wingman57]

My spinning radial with 1400 polys.

[willsonman]

Arrestor Hook
OS FR5 300 Radial Engine

[willsonman]

Weston Magnum R Motor
Robart R780 Radial Motor

[willsonman]

Turbine
2-stroke Pusher with servo and fuel tank

[willsonman]

The classic 9-cylinder Radial motor. 9-cylinder is the lower-poly version by Keylitho.

[dhk79]

5740 polys for a showcase engine.

[herc40]

Here is a general spinner, and the torus I use for setting the prop placement. Next is the Lite wheel Swirl, and an Old Time Pilot figure bust.


These or Wings 3D files, and you MUST rename them back to ( . Wings )

[herc40]

These are some Cub Wheels I made. It has a hubcap on one side, and a flat face on the other, only the tire rubber has a materials.

This wheel features deep grove tire tread, and a stylish hubcap.

if you would like non-spinning hubcaps, I believe, you can leave it as a solid object , name it CAPS with NO ~CS_ in front. and do not add a pivot to it.

This file is a Wings 3D format, and must be renamed .wings

[herc40]

This is the Jessica Rabbit bust. Enjoy
The file is bigger than I can zip. This is a Wings 3D file, and you MUST CHANGE the name of the file back to Jessica Rabbit Bust.wings in order to use it in Wings 3D.

[herc40]

more odds and ends. I have included a Linkage off the Aerobat 40, a Mini Servo for foamies, and my Sargent Danger pilot figure that I used on the Shearwater Hydroski. I also included the Headset from my Wilga pilot.

My Wings 3D, Sargent Danger Pilot file is to big to ZIP, you must change the directory to (.wings) before you can use this pilot figure in Wings 3D. The rest are ZIPPED files, and must be UNZIPPED. Enjoy

[herc40]

This is a static prop I created for Junkboy999, to test how the TMNT engine was going to look. It can be used to have something to look at, for linning up, and sizing your TORUS. Size the prop to what you think it should look like, and run your torus around it. I think its cooL.

I have also added a water rudder setup that I created for the Aerobat 40 w/floats, it has the servo horn allready in place.

Also the Aluminum Landing Gear from my first plane, the Aerobat 40


These files are zipped up, you will have to unzip them.

[willsonman]

By permission: BrentG's MPI or Dubro Wheels

[pplace]

Prop hub used on the Top Flite Elder