Go Back   Knife Edge > RealFlight - Designer's Corner > RealFlight G5 & G4 - Designer's Corner
Use of this site is subject to our Terms of Use. | Technical Support is available from Great Planes Software Support.

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 11-26-2015, 01:48 AM
mtgtopdeck mtgtopdeck is offline
Registered User
 
Join Date: Feb 2009
Posts: 3
Crashtesthobby EPP Foam Wings

I have created models of some popular EPP foam wings from Crashtesthobby.com


Last edited by mtgtopdeck; 02-04-2016 at 06:48 PM.
Reply With Quote
  #2  
Old 12-18-2015, 04:30 PM
mtgtopdeck mtgtopdeck is offline
Registered User
 
Join Date: Feb 2009
Posts: 3
I have added another Crashtesthobby plane called the Albatross.

Reply With Quote
  #3  
Old 12-20-2015, 06:10 AM
Plattenwerk's Avatar
Plattenwerk Plattenwerk is offline
Registered User
 
Join Date: Dec 2015
Posts: 4
So much fun with the Pinata! First time I have a flying wing in my hands and made a good plough out of it
But after some practice I looking forward to meet the SWarM in RF.

Thanks for it!
Tom

Edit: unfortunality in RF7 I can't shut down the throttle of the Albatross, neither on the stick nor on the button. (DX6i) Thats why he always loops like crazy with elevator in neutral (trim tabs full down).
(*grrr*... can't find the 'rate' button...)

Last edited by Plattenwerk; 12-21-2015 at 05:42 AM.
Reply With Quote
  #4  
Old 12-21-2015, 06:22 PM
csgill75's Avatar
csgill75 csgill75 is offline
Registered User
 
Join Date: Mar 2009
Location: Florence, Alabama
Posts: 3,314
Quote:
Originally Posted by Plattenwerk View Post
Edit: unfortunality in RF7 I can't shut down the throttle of the Albatross, neither on the stick nor on the button. (DX6i) Thats why he always loops like crazy with elevator in neutral (trim tabs full down).
(*grrr*... can't find the 'rate' button...)
The Model works fine in 7.5. You need to calibrate your controller in the simulator.
Reply With Quote
  #5  
Old 12-22-2015, 02:22 AM
Plattenwerk's Avatar
Plattenwerk Plattenwerk is offline
Registered User
 
Join Date: Dec 2015
Posts: 4
That's what i've done. The bars in calibration mode shows that throttle can be moved down to 0% but in the simulation the Albatross' motor did not. I'll keep on tryin'.
Reply With Quote
  #6  
Old 02-04-2016, 07:01 PM
mtgtopdeck mtgtopdeck is offline
Registered User
 
Join Date: Feb 2009
Posts: 3
I have added another Crashtesthobby plane which I modified to be 4" wider in the center.
Crashtesthobby Grim Reaper XXL.

It is a replica of a physical model which I built. See build log here.

Reply With Quote
  #7  
Old 12-24-2017, 02:05 PM
phil3915 phil3915 is offline
Registered User
 
Join Date: Dec 2017
Posts: 1
CTH Wing

New member here. FlyingRF7 with a Spektrum DX8G2.
I downloaded your CTH Assassin and GR files.
My system works well with assorted planks and the included Great Planes Slinger flying wing but does not work with the CrashTestHobby wings. The elevons do not appear to be mixed correctly, if at all.
Do I need to setup a different profile or wing type in the TX?
since it works with the Slinger, I don't understand why the CTH wings do not work for me. I tried setting my xmitter to an elevon wing but then RF interpreted the stick movements strangely. Lee at CTH has video of RF flying an Assassin so obviously it works...any help would be appreciated.
Regards,
Phil H.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:31 AM.