Go Back   Knife Edge > RealFlight - Discontinued Products > RealFlight G3
Use of this site is subject to our Terms of Use. | Technical Support is available from Great Planes Software Support.

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 10-24-2017, 09:21 PM
bosshawg's Avatar
bosshawg bosshawg is offline
Registered User
 
Join Date: Dec 2007
Location: Norfolk,England
Posts: 65
Arrow InterLink Plus/Elite Settings

Taranis X9D+ PPM 12ch RealFlight Modes1-4
MasterSimulator/Buddy/DIYHeadTracker Settings for OpenTx 2.2
The"InterLinkPlus.zip" Contains All 4 Mode Settings.
Just Select "Mode*?*Mast.otx" You Fly!..& Copy The 2 Models
Over 2 your Taranis Tx!..With Companion on OpenTx 2.2

Also Place RF-IntLink12.txt & RF12chIntLnk.txt files from the
"InterLinkPlus.zip" To The /MODELS Folder of Your SD Card in your Tx!

Model 02 RF12chIntLnk Works in RealFlight as a 12ch InterLink Tx by plugging 3.5 Jack plug from the back of InterLink Plus/Elite Controller Cable into
the Trainer Port of Taranis X9D+(Powered On).

Model 01 RF-IntLink12 Recquires a 3.5mm Socket Connection from Pins 1(ppm)& 4(gnd)of External Module Plugged into 3.5 Jack plug from the back of InterLink Plus/Elite Controller Cable.

This allows a 2nd Taranis X9D+ Tx 2 Buddy 12ch via the Trainer Port Connection(SH Switch Enabled by the Master Tx).
Ensure Both Tx's are Properly Calibrated between themselves(eg both Throttles centred)

The Master Tx's SH Trigger Switch enables 2nd Tx's Function & that 2nd Tx's SH Trigger Switch enables the DIY_HeadTracker...!
Attached Thumbnails
Click image for larger version

Name:	First.png
Views:	6
Size:	81.1 KB
ID:	58126   Click image for larger version

Name:	Mixes.png
Views:	6
Size:	103.9 KB
ID:	58127   Click image for larger version

Name:	Inputs.png
Views:	6
Size:	66.6 KB
ID:	58128  

Click image for larger version

Name:	outputs.png
Views:	1
Size:	83.3 KB
ID:	58137  
Attached Files
File Type: zip InterLinkPlus.zip (5.7 KB, 4 views)

Last edited by bosshawg; 10-25-2017 at 03:42 PM.
Reply With Quote
  #2  
Old 10-24-2017, 09:55 PM
bosshawg's Avatar
bosshawg bosshawg is offline
Registered User
 
Join Date: Dec 2007
Location: Norfolk,England
Posts: 65
Smile Post#2

2nd Post Due to Additional Attachements
With a DIY_HeadTracker Outputting Channels 9(Roll),10(Tilt),11(Pan)....&Plugged Into Trainer Port of 2nd Tx. Please Modify

2nd Tx's TrackerMix 2 This!{TrackerMix.png}.
Attached Thumbnails
Click image for larger version

Name:	Special.png
Views:	2
Size:	74.3 KB
ID:	58130   Click image for larger version

Name:	TrackerMix.png
Views:	4
Size:	119.6 KB
ID:	58131   Click image for larger version

Name:	BuddySimSetUp.png
Views:	1
Size:	353.3 KB
ID:	58138  


Last edited by bosshawg; 10-25-2017 at 03:54 PM.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:13 AM.