CG off on add-ons volumes 1-5

[rglass1144]

Knife Edge Tech Guys, read this

When I use the planes that came with G3 they fly okay. When I fly the planes from the add ons volumes 1 through 5, the CG is off and they just do not quite fly right. Other than the CG being off I can't exactly put my finger on the problem. I.E. When I load the Tigermoth it keeps nosing over ( pitching down ) on the runway. I must change the CG to get it to stop doing this. Now when it is flying, it is nose heavy. Slow response to elevator and high speed landings indicate the nose heavy condition. When I move the CG back to the point that it wants to fly correctly, it will snap when making my approach to the runway. Just can't make it fly smooth at all. There is a problem with the program itself. These conditions are very pronounced on the Tigermoth and easily demonstrated. All the other aircraft on add ons volumes 1-5 experience these same problems, although not all nose over on the runway, the CG must be moved either positive or negative. I.E. volumes four, the Edge 540 must have the CG moved forward. Just the opposite of the Tigermoth. And the roll rate is sluggish also when comparing the roll rate to the same planes on G2.

Hope this helps you guys at Knife Edge.