Parts Repository ONLY

willsonman

Well-known member
There is to be NO discussion just simply a post of parts for others to use. Engines, pilots, busts, etc.

INCLUDE PART NAMES in your post as this will facilitate accurate searches.

This is not a how-to thread. There are some great parts out there floating around a consolidated thread with them will be very helpful for everyone.
 
Last edited:

herc40

New member
Hello

I have the engines I used on the Avro Anson MK1, the files has 2 engines that are called L&R PP, If you only need one just delete the other. It is 2, Seven piston rotory engine, with a combined total of 704 Face in Wings 3D.
 

Attachments

Last edited:

herc40

New member
hello

These are some Cub Wheels I made. It has a hubcap on one side, and a flat face on the other, only the tire rubber has a materials.

This wheel features deep grove tire tread, and a stylish hubcap.

if you would like non-spinning hubcaps, I believe, you can leave it as a solid object , name it CAPS with NO ~CS_ in front. and do not add a pivot to it.

This file is a Wings 3D format, and must be renamed .wings
 

Attachments

Last edited:

herc40

New member
hello

more odds and ends. I have included a Linkage off the Aerobat 40, a Mini Servo for foamies, and my Sargent Danger pilot figure that I used on the Shearwater Hydroski. I also included the Headset from my Wilga pilot.

My Wings 3D, Sargent Danger Pilot file is to big to ZIP, you must change the directory to (.wings) before you can use this pilot figure in Wings 3D. The rest are ZIPPED files, and must be UNZIPPED. Enjoy
 

Attachments

herc40

New member
more parts

This is a static prop I created for Junkboy999, to test how the TMNT engine was going to look. It can be used to have something to look at, for linning up, and sizing your TORUS. Size the prop to what you think it should look like, and run your torus around it. I think its cooL.

I have also added a water rudder setup that I created for the Aerobat 40 w/floats, it has the servo horn allready in place.

Also the Aluminum Landing Gear from my first plane, the Aerobat 40


These files are zipped up, you will have to unzip them.
 

Attachments

Junkboy999

New member
Wheel Collection

Here is a collection of wheel I have use on my Models.

Tail Wheel. This is the tail wheel assembly that is for the Citabria, Champ, and Super Decathlon Models. It is well suited for tail draggers. See the Classic Citabria for how it is set up

Light Wheel Is for the hearer EEP foam planes.

Nose wheel is for 15 - 120 tricycle planes.

Spoke wheels are High detail and use for vintage style RC models.

These FILE are ZIPPED and Contain Both a Wings3D file and a 3DS file
versions


My files are placed here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.
 

Attachments

Last edited:

Junkboy999

New member
Spoke wheels are High detail and use for vintage style RC models. Pictured above

These FILE are ZIPPED and are in 3DS Format and Wings3d format


My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.
 

Attachments

Last edited:

Junkboy999

New member
A simple engine mount and spinner.

2 Mufflers for the Magnum R motor.zip Engine that RcFubar modeled ( it is posted in post # 5 above )


These FILE are zipped up and contain both a WINGS3d file and a 3DS file.


My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.
 

Attachments

Last edited:

Junkboy999

New member
This is the OS-LA-25 RC engine I put some time into this engine. The spinner is the nut and rod up front. The inside barrel of the Carb is attached to the throttle arm. You can animate this for RF use. Please use this engine for any model you like that needs a 15 - 25 or scale it up ( the head ) for a 40 size. Just remember to give the modeler his Props when posting your model file to the upload page, and in the description information area inside the model editor it's self.


This FILE is in WINGS3D format and is renamed to G3X so you'll have to rename it to wings before use . THe Zip file was to big to upload.

My files are placed in here for other modelers to use for their Real flight Projects only. Do not upload my work to other 3D Graphics sights.
 

Attachments

Last edited:
Top