Request RF6 Aircraft Here

mrstorms

New member
hello there. I am new to this (being able to download mods for real flight) and I saw this post. would it be possible to get a model of the jet from x-men and have it be able to hover as well?
 

f4u

New member
aircraft to be built

Hi, I am really new to the knife edge community and the rc community altogether. I have been looking for a few aircraft that I can not find the two main ones being an EA-6B Prowler as well as an F-35 with VTOL. Let me know if you need any information about these or if you know of someplace to get one that has been made already.
 

Helihemi

Member
I have some pictures and info if needed of a Boeing KC-135 (707) with 3-views. There are also some varients of the Boeing 707 I also have pics and info for. The Rivet Joint Reconaissance plane and the E-3A Sentry AWACS planes. I will provide as much research and pics as needed to help.
 

Attachments

csgill75

Well-known member
Hi, I am really new to the knife edge community and the rc community altogether. I have been looking for a few aircraft that I can not find the two main ones being an EA-6B Prowler as well as an F-35 with VTOL. Let me know if you need any information about these or if you know of someplace to get one that has been made already.
Both of these models are available on the Swap pages...

Search for Grumman A-6 Intruder and F-35B STOVL Here
 
Last edited:

JoeyTheIceCream

New member
REQ: Mirage 2000

I have been looking for months trying to find a Mirage 2000 but i could not find one.
I would like it to be on a 1/7 or even smaller if you dont want to make it that big.


Crew: 1
Length: 14.36 m (47 ft 1 in)
Wingspan: 9.13 m (29 ft)
Height: 5.20 m (17 ft)
Wing area: 41 m² (441.3 ft²)
Empty weight: 7,500 kg (16,350 lb)
Loaded weight: 13,800 kg (30,420 lb)
Max. takeoff weight: 17,000 kg (37,500 lb)
Powerplant: 1 × SNECMA M53-P2 afterburning turbofan Dry thrust: 64.3 kN (14,500 lbf)
Thrust with afterburner: 95.1 kN (21,400 lbf)

Here are some pics :
http://2.bp.blogspot.com/-wdEvuSvBww0/TxibbzG-SyI/AAAAAAAAAaU/i1yCOb-CNgU/s1600/pease-2011_59.jpg
http://decals.kitreview.com/decals/images/Mirage2000_Syh@rt_48-011-00.jpg

If you wouldn´t mind i would love it in the second picture its color sceme

GRTZ,

Joey
 

INeverLikedYou

New member
Hello all.

I'm fairly new to the RC hobby, and practically brand new to RF so please forgive me if I miss anything I'm supposed to include when making a model request. I know there's a CTSW on the pages, but I've always thought the Flight Design CTLS is a beautiful plane and hope someone else thinks so as well and will be inclined to make a version of the Freewing model.

Please let me know if there's anything else I need to include here and I'll look around and see if I can find it.

Thanks!

Airplane Specs-

Wing Span: 28 Feet, 2 Inches
Length: 21 Feet, 8 Inches
Height: 7 Feet, 8 Inches
Cabin Width: 49
Aspect Ratio: 7.29:1
Empty Weight: 790/ 810Pounds
Gross Weight: 1,320 Pounds
Fuel Capacity: 34/35 Gallons
Fuel Economy: 5.5/4.3 Gallons/Hour
Powerplant: Rotax 912S or 912iS (100HP) 2000 TBO
Speed: 120 KTS
Economy Range: @4300RPM 830 NM /1055 NM

A 3 View of the plane:


Model Specs-

Wingspan: 1200mm/47.25in
Length: 900mm/35.4in
Flying Weight: 1100g
Power System: Brushless 3510-1000Kv
Speed Control: 30A, Internal BEC, T connector
Propeller / EDF: 9x8 3 blade prop
Servos: 9g×5
Landing Gear: Fixed
Required Battery: 11.1V 1800mAh 25C 3 cell LiPo
Required Radio: 4 Channel
Rudder: Yes
Flaps: Optional -molded servo area and flap cut outs
Ailerons: Yes
Lights: No
Hinge Type: Nylon hinges on all control surfaces
Material: EPO Foam

And a few pictures of the Model. I couldn't find any "3 view" images unfortunately.


 

INeverLikedYou

New member
I've always thought so! I love how there's hardly a straight edge anywhere on it. I'd be stoked if someone would take the time to create it, but with nearly 80 pages of requests in RF6 alone I'm sure it'll be a while.
 

csgill75

Well-known member
I've always thought so! I love how there's hardly a straight edge anywhere on it. I'd be stoked if someone would take the time to create it, but with nearly 80 pages of requests in RF6 alone I'm sure it'll be a while.
There are only 5 or so airplane creators here lately that are still active. I don't think any are creating for RF 6.5 though as the new exporter only supports RF7 and up. Post a request for a model in the RF7 designer forum and it may peek someone's interest.
 

INeverLikedYou

New member
There are only 5 or so airplane creators here lately that are still active. I don't think any are creating for RF 6.5 though as the new exporter only supports RF7 and up. Post a request for a model in the RF7 designer forum and it may peek someone's interest.
Thanks for the tip!

I'll give it a shot. I've found some models made for later editions work with earlier versions. This one should translate since it's a simple 4 or 5 channel model no?
 

csgill75

Well-known member
Thanks for the tip!

I'll give it a shot. I've found some models made for later editions work with earlier versions. This one should translate since it's a simple 4 or 5 channel model no?
It's not that it's the latest exporter allows a larger amount of polys to be used to create the models. The older versions of realflight won't work with these models. The creator would have to work with a lower limit on the models as well as change the plug-in in 3dsmax.
 

pavlik1

New member
X-UAV mini talon model

Hello

I would like to congratulate for the wast number of models I saw in this forum.

I was wondering if someone will be so kind to make a model of X-UAV mini talon

 

csgill75

Well-known member
Hello

I would like to congratulate for the wast number of models I saw in this forum.

I was wondering if someone will be so kind to make a model of X-UAV mini talon

See the above posts. The same still applies but with less modelers now. Nobody creates for Realflight 6.5 anymore.
 

technoid

Well-known member
See the above posts. The same still applies but with less modelers now. Nobody creates for Realflight 6.5 anymore.
There's still one modeler that supports RF 6.5. Fly_electric released his Quad Fan Delta for RF 6.5 and I think he's on track to release his newest model for RF 6.5 (Sig Morrisey Bravo). But he has limited time for modeling so he stays pretty busy.
 
Top