Spektrum Controller Issues

N

nige0911

New member
I installed the RF9 today and added the WS2000 dongle. I bound my DX7S to it and then calibrated it. The calibration showed that everything was working as it should be but when I into the flight sim and fly a model I have no down elevator despite this working showing as working in the calibration. Has anyone else experienced this problem or got any ideas/solutions on how to resolve this as I tried several re-calibrations and still no luck? :confused:
 
C

caltain

Active member
Calibration just sets the range and center of the controls. It doesn't change which control on your radio goes to which control channel in the sim.

You need to edit the controller profile in Simulation > Select Controller... to put the right stick vertical axis on Channel 2 there, assuming you use the usual Mode 2 gimble arrangement.
 
You must log in or register to reply here.
Top